![]() |
|
| *AX SOFT>>>Computer Networking |
Do you have to configure pc if you connect two with cross over ethernet cable? How? |
step by step please. do it for a dummy. thank you All you need to do is put each computer into the same workgroup and enable file and printer sharing. To connect a PC to a PC with a crossover just connect the crossover cable (make sure it IS crossover) to each of the computers eth ports. Then ensure the windows firewall(s) are turned off to make sure no blocks happen. Make sure the computers are in the same workgroup as well (right click on the my computer, then goto properties and see your workgroups, if they don't match you can't file share, make em the same). hey yeah, great little Lan there!!! |
| Tags |
| Laptops & Notebooks Monitors Printers Scanners General - Hardware Computer Networking |
| Related information |
Let's cover what you need to get Internet access to more than one computer at home, via wireless LAN (local area network). The concept is the same for WIRED networks. Add Cat5e Ethernet cable... ... First off, to install a program using SMS, you do NOT have to have the installer in MSI format. Yes, it is the preferred format for the Microsoft world but it isn't necessary to be in that for... Your new modem/router will divide the bandwidth based upon demand. If you are the only one connected to the Internet, you will get all of the bandwidth. If you and 3 other people were connec... The command in XP is the same as it was in 98 or ME. At a command prompt you use Net Send Most systems have XP service pack 2. When service pack 2 is installed on XP, it disables the Mess... You don't adjust the MTU of your DSL or Cable network bridge, you adjust the settings of your Xbox to suit the network bridge. If you were able to adjust the MTU of your cable or DSL network ... The managed switch will have a mac address associated with it ip address. The individual ports do not have a mac address. The mac address of the PC attached to each port becomes assocated with th... Well All i can say is make sure u are typeing the right thing and if that doesnt work make a new account ... |
Categories--Copyright/IP Policy--Contact Webmaster |